» Home » Desktop Drives » Samsung Drives

Samsung SpinPoint V60 SV1204H 120G Hard Drive

Data Recovery For Samsung SpinPoint V60 SV1204H 120G Hard Drive
Family: SpinPoint V60
Capacity: 120 GB
Model: SV1204H
VERNA

How much is data recovery cost?

Experiencing data loss on your inaccessible SV1204H 120Gb Samsung hard drive? We can definitely get that lost data back - nearly two decades DataBe recovers data from failed Samsung disks. Fair, flat service cost. Case-monitoring system is available online 24-7.

Repair used HDD to get data back

Recovering data from old hard drive can be done much faster for specialist, because the smaller capacity of device takes less time to retrieve information from the lesser number of logical sectors with data. Databe Lab has large collection of new and older legacy hard drives ready for using as parts in repairing manipulations for data retrieval purposes.

3.5" Hard Drive (from Desktop PC or MAC) Regular Service
(3-5 days)
Emergency Service
(round-clock)
Samsung SpinPoint V60 SV1204H 120G Hard Drive
$488
$688
Start Data Retrieval Job for this drive:

You make a deal, we do the rest. Know the service cost in advance and save time, funds, and nerves.

We Guarantee:

You do not pay until the data you need is recovered.
No beforehand payment is ever asked, nor accepted ahead of our Recovery Report.
You may proceed with the payment only after you have reviewed the recovery process results and satisfied with its outcome.
Otherwise, no recovery labor charge.
DataBe provides fast and strictly Confidential Service.


SP0411N Error: drive not ready system halted
Drive spins at power on but stops after a few seconds, BIOS doesn't detect Drive.
Original drive (labeled "A") PCB blew as result of a power supply failure, we got a new identical drive (labeled "B") and replaced PCB, drive then showed the above described symptoms (Spins for a few seconds)
We returned new PCB to the new drive, that still worked fine, and then swapped platters, the bug followed the platter, the new drive with the original platter fails, and the old drive with the new logic and the new platter works fine. Data to recover is now in platter installed in new drive, labeled "B".
We would like to thank you very, very much for getting our data, when we thought it was gone, considering what we had tried with the drive in the order to get the data off. Your professionalism is outstanding. We will definitely use your company services if the need occurs at the time. Thanks a lot, Mariano F. Mariano F. Buenos Aires, Argentina

How to recover IC35L120AVVA07
I had to reboot the system after not using for awhile. When the PC rebooted, the HDD that I am sending you was not recognized. I checked in the BIOS setup and the IDE channel is still active, but it reports no drive is attached. The only thing I've done is checking the drive in BIOS and powered up the drive without the IDE connection. The drive spun up and didn't make any unusual noises. I stopped at that point from trying to do anything after I read your web site warning about trying to change the electronics.
Dear Databe, It looks like you are able to access all my files and save the data. Thank you for your quick, professional approach to my problem. Thank you, Tom H. Tom H. Rockwall, TX USA

 

Read More