» Home » External Hard Drives » Western Digital Drives

Western Digital Light-Up WD FireWire and USB 2.0 Combo WDXC2500JB 250Gb External Drive Data Recovery

Western Digital Light-Up WD FireWire And USB 2.0 Combo WDXC2500JB 250Gb
Family: Light-Up WD FireWire and USB 2.0 Combo
Capacity: 250 GB
Part Number/Code WDXC2500JB
Special Edition Extreme Lighted external hard drive

How much is External Drive Data Recovery cost?

DataBe Lab provides data recovery service for WDXC2500JB Light-Up WD FireWire and USB 2.0 Combo 250 Gb Western Digital external storage drive. Follow the recovery process in online at any time.

Repair External Drive to Get Data Back

Make a deal directly with the data recovery specialist and get guaranteed result at fixed and very reasonable rate - considering the fact that best of IT professionals will throw their top-notch skills into the scale to win the fight for your data.

3.5" External Hard Drive
(with USB or any other connection port)
Regular Service
(3-5 days)
Emergency Service
(round-clock)
Western Digital Light-Up WD FireWire and USB 2.0 Combo WDXC2500JB 250 Gb External Drive
$488
$688
Start Data Retrieval Job for this drive:

Why dead WD Drive won't spin up

The first reason why your drive doesn't spin can be damage to the electrical circuits. The burnt electronic components on the attached circuit board to the bottom of the drive or internal head arm electronic inside the drive are true candidates to be the source of dead drive silence. The noticeable smoked elements on the board, a distinctive smell with no indication of the spinning motor can tell you the clear story of the power surge mishap. Simple idea to swap board from another drive is not working for hard drives. Our specialists are able to recreate original PCB firmware using low-level access to internal microcode on platters. Then they re-program the donor's onboard ROM, making the spare part board the genuine, fully compatible, and safe to use with failed drive and access the user data

The second major cause of absolutely silent hard drive can be the heads stiction to the platter surface. Heads are normally parked at certain parking tracks on the disks just beside the spindle, or on the parking ramp outside of the platters. By some reason (sharp shake or drop) the head tips can fail to land to the correct parking spot and fell right on the disk surfaces. And they stick to disk platters! The cohesive intermolecular forces are surprisingly strong between smooth surfaces of heads and platters. There are no simple solutions to unglue the stack heads, but simple enforcing applied directly to the spindle or head arm in attempt to pull off heads from disks will lead to inevitable disk scratching and data loss.

Finally, the stuck motor spindle or the coil wire breakdown (inside the motor) will bring the data recovery task to the upper level due to the absolute necessity to transfer disks to the new drive-recipient spindle.

You make a deal, we do the rest. Know the service cost in advance and save time, funds, and nerves.

We Guarantee:

You do not pay until the data you need is recovered.
No beforehand payment is ever asked, nor accepted ahead of our Recovery Report.
You may proceed with the payment only after you have reviewed the recovery process results and satisfied with its outcome.
Otherwise, no recovery labor charge.
DataBe provides fast and strictly Confidential Service.


Problem Solved

 

Read More