|
DataBE.com Data Recovery Service for Failed Maxtor Hard Drive |
Quick Start!
|
|||||
|
|||||||
| You make a deal, we do the rest. Know the service cost in advance and save time, funds, and nerves. |
Tel. 416-762-O8O1
|
Data recovery from
We Guarantee: You do not pay until the data you need is recovered. No beforehand payment is ever asked, nor accepted ahead of our Recovery Report. You may proceed with the payment only after you have reviewed the recovery process results and satisfied with its outcome. Otherwise, no recovery labor charge. DataBe provides fast and strictly Confidential Service.
|
... or Would you like FLAT RATE?If you have a dead, not spinning, or clicking hard drive with any obvious symptoms of the physical damage, you might just want to go ahead with a flat rate pricing. One FLAT RATE / FIRM PRICE covers any recovery procedures needed to be taken, including clean room drive repair manipulations. * Regular service is for 5-7 days turnaround ** Order an Emergency service when time is critical factor. The time frame for EMERGENCY SERVICE: same day if possible, or normally 1 to 2 days. Some jobs take longer time depending on the complexity. |
Failed Western Digital WD2000BB - 00DWAD hard drive repair required External LaCie Drive (with Western Digital HD) would not boot, so I replaced the power supply -- it booted just fine. Powered down for a couple of weeks. Updated the System software from a previous version of Mac OS X.4 to X.4.6. External drive failed to boot and could not be recognized by Disk Utility or Disk Warrior. Tried to get drive to work by changing out power supplies several times. No luck. The LED power light flickers repeatedly, both when the drive is powered and not plugged into the FireWire and when it is plugged to the FireWire and computer. John S.
Thank you for recovering my data, it's much appreciated.
Inaccessible 4D080H4 drive This is a 'Case #2' failure (described on your website). The BIOS is no longer recognizing the Maxtor drive model number or serial number and instead displays only the drive's 'family name'(Romulus). The computer will not boot up. POST stops at a screen that says 'F1 for Setup F2 to continue.' It was installed in a second PC as a 'slave' but it was not recognized. Kerry T.
Hello DataBe.com,
|
|||
|
DataBe.com© 2012 Data Recovery Services
|
|||||