|
Data Recovery
Quick Start
|
ST3300622A Seagate Barracuda 7200.9 PATA 300 GB Hard Drive Data Recovery
If you are looking a FIRM price for data recovery BEFORE you send the failed data media to the recovery lab, then this is the RIGHT place for you.
|

| Manufacturer / Family | Seagate Barracuda 7200.9 PATA |
| Storage Capacity | 300 GB | | Model | ST3300622A | | Factory internal code | TONKA2 |
|
Regular Service Data Recovery Price
$890
ONE FLAT PRICE covers any recovery procedures need to be taken, including software, firmware, and hardware recovery. Electronic components and Clean Room Repairs are included as well. There is no charge for using our parts.
Failed HDD Symptoms
We recover the data off of this hard drive regardless the symptoms, the drive's condition, such as broken, dead, not-spinning, clicking, ticking, or noisy drive; not detected by computer's BIOS or OS; burned circuit board elements, damaged surface; "Blue Screen" or any other issues: ONE FLAT PRICE
|
When applying for data recovery service for this drive, you may choose between Regular and Emergency services.
|
FLAT Price
for
Regular Service |
FLAT Price
for
Emergency Service |
ST3300622A Seagate Barracuda 7200.9 PATA 300 GB Hard Drive Data Recovery
|
|
|
All prices shown are in U.S. dollars
Flat price covers ALL recovery procedures, including
- Clean Room Repairs (for all internal damages like clicking noises, heads damage,
motor
problems,
severe media damage
to platters;
These problems are fixed by opening the hard drive under clean room conditions)
- Firmware problems (Internal microcode damaged)
- Electronic components (burned PCB)
- Software recovery (File System corrupted; viruses; deleted files, etc.)
Turnaround time for regular and emergency services.
The regular turnaround time typically takes 3-5 days.
EMERGENCY SERVICE is available as well. The time frame for this type of data recovery service: same day if possible, or normally 1 to 2 days. The EMERGENCY SERVICE recovery cost is indicated in the price table above.
Please be aware of, in some complex recovery cases the recovery process time may be affected by capacity of hard drive and condition of surfaces on the disk.
For detailed information about our other optional services you may order, conditions, shipping cost, etc., please click here.
|
|
From customer's correspondence
|
David M.
Michael Allen Company
Westport, CT USA
Maxtor 5T050H6 60 GB
From Customer's order
Drive is NOT visible in BIOS. The first problem was that the drive failed to boot with a message that the NTLR was missing (or something like that). I then bought a new drive and installed a new OS on that drive (hoping to read this drive as a slave). I do not believe that any data has been written to the old drive since the drive's initial failure to boot. But now when I start the PC, whether I use a cable select or master/slave configuration for the two drives (old/failed and new), the BIOS reports a hard drive failure on this old drive, and the OS does not see the drive at all. The new drive works fine, suggesting that the problem is definitely with the drive, not the PC or controller.
After recovery:
Thank you, David M.
|
Marlon S.
ReWave
Concord, NC USA
Seagate ST9120821AS 120GB SATA
From Customer's order
Drive is clicking, not in BIOS
After recovery:
Thank you so much for recovering data off this drive...
|
|