|
Data Recovery
Quick Start
|
ST3500830AS Seagate Barracuda 7200.10 SATA 500 GB Hard Drive Data Recovery
If you are looking a FIRM price for data recovery BEFORE you send the failed data media to the recovery lab, then this is the RIGHT place for you.
|

| Manufacturer / Family | Seagate Barracuda 7200.10 SATA |
| Storage Capacity | 500 GB | | Model | ST3500830AS |
|
Regular Service Data Recovery Price
$890
ONE FLAT PRICE covers any recovery procedures need to be taken, including software, firmware, and hardware recovery. Electronic components and Clean Room Repairs are included as well. There is no charge for using our parts.
Failed HDD Symptoms
We recover the data off of this hard drive regardless the symptoms, the drive's condition, such as broken, dead, not-spinning, clicking, ticking, or noisy drive; not detected by computer's BIOS or OS; burned circuit board elements, damaged surface; "Blue Screen" or any other issues: ONE FLAT PRICE
|
When applying for data recovery service for this drive, you may choose between Regular and Emergency services.
|
FLAT Price
for
Regular Service |
FLAT Price
for
Emergency Service |
ST3500830AS Seagate Barracuda 7200.10 SATA 500 GB Hard Drive Data Recovery
|
|
|
All prices shown are in U.S. dollars
Flat price covers ALL recovery procedures, including
- Clean Room Repairs (for all internal damages like clicking noises, heads damage,
motor
problems,
severe media damage
to platters;
These problems are fixed by opening the hard drive under clean room conditions)
- Firmware problems (Internal microcode damaged)
- Electronic components (burned PCB)
- Software recovery (File System corrupted; viruses; deleted files, etc.)
Turnaround time for regular and emergency services.
The regular turnaround time typically takes 3-5 days.
EMERGENCY SERVICE is available as well. The time frame for this type of data recovery service: same day if possible, or normally 1 to 2 days. The EMERGENCY SERVICE recovery cost is indicated in the price table above.
Please be aware of, in some complex recovery cases the recovery process time may be affected by capacity of hard drive and condition of surfaces on the disk.
For detailed information about our other optional services you may order, conditions, shipping cost, etc., please click here.
|
|
From customer's correspondence
|
Kerry T.
Madison, CT USA
Maxtor 4D080H4 80 GB
From Customer's order
This is a "Case #2" failure (described on your website). The BIOS is no longer recognizing the Maxtor drive model number or serial number and instead displays only the drive's "family name"(Romulus). The computer will not boot up. POST stops at a screen that says "F1 for Setup F2 to continue." It was installed in a second PC as a "slave" but it was not recognized.
After recovery:
Hello DataBe.com,
My cloned hard drive is delivered today -- I'm so pleased with your services! It works just fine on my new 200 GB drive!!!
Best,
Kerry T.
|
Bill B.
Lake in the Hills, IL USA
Maxtor 6Y080L0 80 GB
From Customer's order
Unable to load windows--even in safe mode. Drive recognized by BIOS, it spins with no clicking.
After recovery:
Dear Databe recovery team,
Everything is back to normal, seems like nothing happened. I'm so happy with your services and would like to let you know that I'd recommend it to anyone who might get in such situation. Very thankful.
Thank you,
Bill
|
|