|
Data Recovery
Quick Start
|
10.2AT EX10A013 Quantum Fireball EX 10 GB Hard Drive Data Recovery
If you are looking a FIRM price for data recovery BEFORE you send the failed data media to the recovery lab, then this is the RIGHT place for you.
|

| Manufacturer / Family | Quantum Fireball EX |
| Part Number / Code | 10.2AT EX10A013 | | Storage Capacity | 10 GB | | Model | FIREBALL EX10.2A |
|
Regular Service Data Recovery Price
$690
ONE FLAT PRICE covers any recovery procedures need to be taken, including software, firmware, and hardware recovery. Electronic components and Clean Room Repairs are included as well. There is no charge for using our parts.
Failed HDD Symptoms
We recover the data off of this hard drive regardless the symptoms, the drive's condition, such as broken, dead, not-spinning, clicking, ticking, or noisy drive; not detected by computer's BIOS or OS; burned circuit board elements, damaged surface; "Blue Screen" or any other issues: ONE FLAT PRICE
|
When applying for data recovery service for this drive, you may choose between Regular and Emergency services.
|
FLAT Price
for
Regular Service |
FLAT Price
for
Emergency Service |
10.2AT EX10A013 Quantum Fireball EX 10 GB Hard Drive Data Recovery
|
|
|
All prices shown are in U.S. dollars
Flat price covers ALL recovery procedures, including
- Clean Room Repairs (for all internal damages like clicking noises, heads damage,
motor
problems,
severe media damage
to platters;
These problems are fixed by opening the hard drive under clean room conditions)
- Firmware problems (Internal microcode damaged)
- Electronic components (burned PCB)
- Software recovery (File System corrupted; viruses; deleted files, etc.)
Turnaround time for regular and emergency services.
The regular turnaround time typically takes 3-5 days.
EMERGENCY SERVICE is available as well. The time frame for this type of data recovery service: same day if possible, or normally 1 to 2 days. The EMERGENCY SERVICE recovery cost is indicated in the price table above.
Please be aware of, in some complex recovery cases the recovery process time may be affected by capacity of hard drive and condition of surfaces on the disk.
For detailed information about our other optional services you may order, conditions, shipping cost, etc., please click here.
|
|
From customer's correspondence
|
Chet K.
Belleville, IL USA
Western Digital WD1000BB-00CAA0 100 GB
From Customer's order
This drive was installed as primary slave. No abnormal noises. One day on boot up got "Primary Slave Hard Drive Failure" Bios recognizes the drive but it is not accessible with DOS or Windows programs. Western Digital diagnostics returns S.M.A.R.T. error code 0159 (defective drive, replace). I did try using Get Data Back software. Get Data Back recognized the drive from Windows but did not recovery any data.
After recovery:
Expedient, very accurate, effective process.
Thank you,
Chet
|
Jon C.
Any Design Monogram Embroidery IncJon
Melrose, MA USA
Quantum LCT20 10GB
From Customer's order
We placed a floppy in the computer and the screen went black. Attempts to reboot the PC failed. The BIOS no longer sees the drive. We tried the drive in another PC and the drive was not recognized by BIOS either.
After recovery:
Thank you for recovering our data! ..is very much appreciated.
Regards,
Jon
|
|