Dear Customers!
When you receive your data back, please share the thoughts of your experience with us, by leaving a testimonial / feedback in your job profile.
Thank You for your courtesy!

Log into your project & track
» Your Order Status
» Data Recovery Status
» Shipping Status
» Payment
» Testimonial

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 previous | next page

Robert M.
Our Town Mortgage LLC
Portland, Maine USA

Fujitsu MPG3204AT


Inaccessible, but functioning, not recognized by BIOS



Thank you for your help with this project
Thank you,
Robert


Rich K.
Aspen, CO USA

Seagate ST94011A laptop


Fried Chip on circuit board; not in BIOS; does not spin



Thanks
Rich K


David R.P.
Trimble County, Kentucky USA

Seagate ST2000DM001 Barracuda 7200.14 2Tb


The Award BIOS reports it as 0 lba? cannot access the drive. No attempts to recover



Dear DataBe team,
There is no need to keep my data any longer since I have received it all 100%. Thank you very much for your service. I will not hesitate to recommend you to people in the future.
Sincerely,
David R. P


Alex G.
MCS Limited
Hamilton, BERMUDA

Fujitsu MPG3307AT


- The PC was shutdown and when it was restarted it would not boot up. The secondary drive was removed and the primary drive booted into the OS with no problems. I moved the drive to another machine and noticed the drive was not spinning or making any noise on power up. I checked the power cables in both PCs and different IDE cables as well. The drive would not power up in either machine. I suspect that something has happened to the circuit board and the data is intact.
- No actions to alter the drive were made



Please use my contacts at any time you need a reference with regards to your services, as it is really great and professional. Thanks a lot for recovering our data.
Kind regards,
Alex


Sam W. Toronto, Ontario Canada

HGST Travelstar 5K1000-1000 1000 Gb, HTS541010A9E680 laptop


Dead drive, after accidental dropping from the table on the floor. Not spinning, no sound of internal movement. It may be an issue with the stuck motor or bent spindle. This drive must go directly to the sterile room for internal inspection and repairing.



Well done, really great job. I'm very pleased with your services.




Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 previous | next page



Ready to start repairing your data?

You may start your Contact with us right now: